
KG170A Gasoline High Pressure Washer
- Net Weight30kg
- Pressure150-170Bar / 220-2500PSI
- Max Flow9LPM / 2.4GPM


SUPERKIGER engine-driven high-pressure washers combine a single-cylinder 4-stroke air-cooled petrol engine with an aluminium pump head for mobile cleaning work where mains power is unavailable. The KG170A delivers 150-170 bar (220-2500 PSI) at 9 litres per minute (2.4 GPM) from a 212cc 7.0HP engine running at 3400rpm, with recoil starting and a 30kg gross weight. The KG180A steps up to 180-200 bar (2600-2900 PSI) at the same 9L/min flow rate, and offers an aluminium or brass pump head for higher duty cycles, at 31.5kg gross weight. Both models share 560x475x535mm dimensions and run on regular automobile gasoline, making them a straightforward addition to any distributor's construction, agricultural, or vehicle-cleaning equipment range.
KG170A at 150-170 bar (220-2500 PSI) and KG180A at 180-200 bar (2600-2900 PSI).
Identical 9L/min (2.4 GPM) flow lets one hose and nozzle set serve the whole range.
KG170A uses an aluminium head; KG180A is available with aluminium or brass for heavier duty cycles.
Single-cylinder 4-stroke air-cooled petrol engine at 3400rpm with recoil starting, so no mains supply is needed.
Both models share 560x475x535mm dimensions for straightforward vehicle loading and container planning.
The KG170A delivers 150-170 bar (220-2500 PSI) with an aluminium pump head at 30kg gross weight. The KG180A delivers 180-200 bar (2600-2900 PSI) with an aluminium or brass pump head at 31.5kg. Both use the same 212cc 7.0HP engine and produce 9L/min.
No. Both models are driven by a 7.0HP single-cylinder 4-stroke air-cooled petrol engine with recoil starting, so they operate anywhere regular gasoline is available.
Both models run on regular automobile gasoline. Pump heads are aluminium on the KG170A, and the KG180A is available with an aluminium or brass head.
Both models measure 560x475x535mm. Gross weight is 30kg for the KG170A and 31.5kg for the KG180A.